If we have trouble with water flow, what will we do ? 
Tuesday, August 29, 2006, 12:26 PM
After placing the bottle on the cooler allow 1-2 mins for the water to flow into cooler reservoir or until the air is no longer gurgling in bottle. Take 2-3 glasses of water and insure that the water in the bottle is gurgling. Turning the bottle clockwise and anti-clockwise will also help.

Ensure that the correct probe is fitted as there are two types of probes. One probe for piercing the cap and there is a probe designed for the resealable cap.

Could you give me some User Safety Instructions ? 
Tuesday, August 29, 2006, 12:17 PM
* Always observe good practice when lifting, stacking and moving racks.

* Always ensure the equipment you are using for handling racks is suitable and in good repair.

* Only trained personnel should operate fork lift trucks.

* Only lift one transport rack at a time.
* Ensure racks are correctly positioned onto the lower racks when stacking.

* Do not drag racks across other racks when positioning or lifting.

* Ensure bottles are correctly located and cannot fall from the rack when lifting or moving.

* Loaded racks should not be stacked more than two high.

* Racks should only be lifted with an evenly distributed load. The forks
positioned at a span of approx. 75% of the rack width and an equal distance from each side.